MF1 Metal tube float flowmeter-Haina Meter | Industrial Flow Meters, Level Instruments & Purge Systems
+86 13306356181
5d628dba35cjhbz3.jpg
5d628dba35cjhbz3.jpg

MF1 Metal tube float flowmeter

Model: MF1

Name: Metal tube float flowmeter

Function:

MF1 series metal tube float flowmeter is a high-performance industrial flow measurement instrument for liquids, gases and steam, with a wide working temperature of -196℃ to +450℃ and pressure up to 42MPa. It supports vertical/horizontal installation, 4-20mA/HART7/Profibus-PA multi-protocol communication, explosion-proof design and corrosion-resistant material options (PTFE/PFA/304 stainless steel), suitable for oil & gas, chemical industry and water treatment projects. Featured with ±1.5%FS standard accuracy, modular transmitter and real-time LCD flow display, it provides reliable flow monitoring for corrosive, high-temperature and high-pressure industrial working conditions.
Send Inquiry
  • Description
  • Parameters
  • Application
  •       It adopts a full metal structure, magnetic isolation sensing, no additional holes, and can be used to indicate the pointer on the spot, or it can be equipped with a variety of signal transmitting and alarm switches. Stainless steel lining PTFE or PFA can also be used to measure the flow of strong acid and strong alkali fluids.

    Measuring tube:

    l Sturdy all-metal construction design to meet all pressure levels

    l You can choose from stainless steel, Hastelloy, titanium, Inconel, Monel, PTFE, PFA, ceramic and other materials.

    l Special structural design can meet the needs of high temperature use

    l New structure facilitates the use of X-rays for safety inspection of welds

    l In addition to the vertical installation structure in the bottom and out, it can meet various installation needs.

    l For crystallization media or occasions where insulation is required, you can choose a jacket type

    Indicator

    l Optional cast aluminum, 304 or 316 stainless steel indicator housing

    l Coaxial magnetic system, powerful pointer damping function, makes the instrument run safer, more stable and reliable

    l Independent junction box design, just open the rear junction box to reduce human errors

    l Modular design, which can quickly add or replace transmitters to the instrument on site

    l With explosion-proof button, you can adjust the transmitter parameters on site without opening the housing.

    l The transmitter has the function of LCD (backlight) to display instantaneous flow and accumulated flow in the field

    l Two-wire 4-20mA transmitter module can be selected

    l Optional NAMUR, dry contacts and open collector alarm switches, meet different operating conditions and integrated system requirements

    l Optional four-wire Modbus RTU communication, or two-wire HART7.9, FF, Profibus-PA and other communication protocols

    l It has a variety of fault diagnosis and alarm functions such as sensors, memory, float jams, sensor demagnetization and flow fluctuations.

    l Battery-powered models with low power consumption are available

    l Explosion-proof: Exa / Exd (gas / dust), PCEC, ATEX, EAC

    l Other certifications: CPA (China), PAC (Russia), SIL, EMC, PED, TSG



    Send Inquiry